Teste nitratos NO3 JBL...ajuda!!

[joao paiva]

ola

 

alguém consegue arranjar as instruções e código de cores do teste de nitratos da JBL?é que eu tou a pensar comprar só o reagente que fica mais barato!

 

alguém que passe no scanner a parte que diz quantos mL e quantas gotas se deve deitar!

 

obrigado e abraço.

[Diesel_Car]

Olás,

 

No site da jbl explica:

 

1- Repeatedly rinse both test jars with the aquarium water to be tested.  

2- Use the enclosed syringe to fill each of the test jars with 10 ml of sample water.  

3- Add the reagents to one of the test jars as follows:

A.) 2 large measuring spoonfuls (broad end of the enclosed double-ended spoon) of reagent 1

B.) 6 drops of reagent 2, seal and agitate vigorously for exactly 1 minute; (powder does not dissolve completely!)

C.) allow to settle until the colouring develops (10 minutes).

 

4- Place both test jars into the comparator block: the jar with added reagent into the smooth end of the comparator block, the jar with the untreated test water (blank sample) into the notched end of the comparator block.  

5- Move the comparator block together with the jars side to side over the colour chart until the colour of the sample with added reagent matches the colour of the blank sample.  

6- Read the nitrate content in the notch of the comparator block.  

 

Cumps,

Nuno Reis

Ps- tens a tabela de cores?

[jonas63]

Compra o teste da sera, fica pelo mesmo preço dos reagentes da JBL e é mais fiável.

 

Fala com o prates